The rinse aid quantity is set too low.
Increase the rinse aid dispensing quantity.
Support for yourDishwashing
White residue on load items
Clouding has occurred on crockery, glassware and cutlery after the wash cycle. The film can be wiped off.
Only for dishwashers with water softener:
There is no salt in the salt container.
Fill the salt container with reactivation salt.
Only for dishwashers with water softener:
The salt container cap has not been screwed on correctly.
Replace the cap, making sure that it screws back on correctly.
Not enough detergent was dispensed.
Use more detergent during manual dispensing or change the detergent you are using.
Use the AutoDos function (depending on the model). AutoDos automatically dispenses the right quantity of detergent. If necessary, increase the dispensing quantity during automatic dispensing “Settings”.
Too much detergent was dispensed.
Use less detergent during manual dispensing or change the detergent you are using.
Use the AutoDos function (depending on the model). AutoDos automatically dispenses the right quantity of detergent. If necessary, reduce the dispensing quantity during automatic dispensing “Settings”.
Activate the 2nd interim rinse function (depending on the model).
An unsuitable combination product has been used.
Switch to another detergent. Use normal detergent tabs or powder detergent without combination products and ensure you refill the salt and rinse aid.
For thorough and gentle cleaning of glasses, crockery and cutlery, we recommend Miele products.
Only for dishwashers with water softener:
The water softener is set to a water hardness that is too low.
Set a higher water hardness in the water softener.
Additional media
Operating Instructions finder
Here you will find the operating instructions for your Miele appliances
Find your manual
