The milk container sensors may not work properly if they are soiled.
Cleaning the glass milk container:
Remove and empty the milk container.
Use a damp sponge cloth to clean the milk container holder on the coffee machine.
Both the lid and the glass container can be cleaned in the dishwasher, or by hand using warm water and a little washing-up liquid.
Rinse the milk pipework in the lid under running water and then place the milk container lid in the dishwasher.
If no water flows out of the milk pipework (1), dismantle the milk container lid and clean it with the cleaning brush supplied.
Pull the milk suction tube (1) out of the milk container lid. Ensure that you also remove seal (2) when doing this.
Also use the cleaning brush to clean the milk pipework in the lid from above and below.
When assembling the milk container: first insert the seal into the lid.
Fit the milk intake tube with the straight end into the seal.
Clean the glass container.
Use a clean cloth to dry all parts, paying particular attention to the threads on the lid and on the glass.
Cleaning the stainless steel milk container with handle:
Please clean the stainless steel container with hot water after use to remove any residual milk.
Rinse the handle under running water and then clean it thoroughly with a clean damp cloth to remove any milk residue.
If the milk pipework in the lid is clogged, please clean it under running water using the cleaning brush. To do this, insert the cleaning brush into the milk pipework and move it back and forth as far as it will go until all milk residue has been removed.
Take particular care when cleaning the handle, intake tube and thin metal rod between the tubes. Rinse the tubes under cold running water. Then leave the tubes to dry.
Check whether the gold contact on the right-hand side of the door (milk jug opening) is clean. Clean the gold contact if this is not the case.